Design and Development, Production, Marketing. Manufacturer, Exporters Quality Products such as Instrumentation Valves, Precision pipe Fittings, PTFE products, pipe fittings, flanges, valves, fasteners at cheap rates only at Kurat Enterprise from India.
|
|
|
Assessories and Consumables |
 |
| Assessories and Consumables>Tube and Pipe Clamp > Pipe Clamps >> |
| |
|
| |
| Pipe Clamps |
Clamps mounting systems :
- Designed and manufactured as per DIN 3015 part 1, 2 & 3.
- Ensures a simple, reliable dampening support for tubes, pipes, hoses and conduits.
- Absorbs vibrations ,Reduce noise level ,Provides rigid support to the piping, Reduces chances of leakage due to loosening of joints.
Application :
Industrial Hydraulics, Mobile Hydraulics, Marine Hydraulics, Offshore, General Industrial Pipe Construction
Mining Industry, Nuclear Reactor Construction, Instrumentation and Control Technology, Pneumatics
Specification : DIN 3015 Part 1 , DIN3015 Part 2, DIN 3015 Part 3
MATERIAL OF CONSTRUCTION :
- JAWS : Poly Propylene, Poly Amide / Poly Amide GR, Aluminum.
- TOP & BOTTOM PLATE: M.S. Yellow plated / Phosphated, S.S. in natural finish.
- BOLTS : M.S. Yellow plated / Phosphated, S.S. in natural finish.
OTHER RANGE INCLUDES :
- Construction series pipe clamps.
- Flat steel 'U' bolt clamps.
- Round steel 'U' bolt clamps.
- Metal pipe clamps saddle type.
|
| |
|
| |
| PIPE OD |
RECOMMENDED SPACING |
| 6mm to 12.7mm |
1meter |
| 12.7mm to 22mm |
1.2 meter |
| 22mm to 32mm |
1.5 meter |
| 32mm to 38mm |
2meter |
| 38mm to 57mm |
2.7meter |
| 57mm to 75mm |
3 meter |
| 75mm to 88.9mm |
3.5 meter |
| 88.9mm to 102mm |
4 meter |
| 102mm to 114mm |
4.5 meter |
| 114mm to 168mm |
5 meter |
| 168mm to 219mm |
6 meter |
|
| |
| Material Specification for clamp jaws |
| |
| Material |
Polypropylene PP |
Poly Amide PA |
Aluminum AL |
| Mechanical Properties |
Tensile Stress |
28 N/mm2 |
170 N/mm2 |
180 N/mm2 |
Flexural Deflection |
36 N/mm2 |
130-200 N/mm2 |
----------- |
Impact Resistance |
no failure |
60 KJ/m2 |
----------- |
Compressive Strength |
90 N/mm2 |
120 N/mm2 |
HB 500-600N/mm2 |
Modules of Elasticity |
1150 N/mm2 |
3000 N/mm2 |
70000N/mm2 |
| Thermal Properties |
MAX. TEMP. |
-300...+900C |
-400...+1200C |
UP TO +3000C |
| Electrical Properties |
Specific Resistivity |
1016Ohm x cm |
1015Ohm x cm |
---------- |
| Chemical Properties |
Chemical Resistance |
Resistant to most
aqueous solutions
of inorganic salts,
minerals, and
organic acids,
even at high
temperatures. |
Resistant to organic
solvents, dilute
acids, and bases.
Resistant to
radiation. |
Resistant to
neutral and sea
water, organic
acids, esters, oils,
and inorganic
salt solutions. |
|
| |
| PIPE CLAMPS STANDARD SERIES DIN3015 PART -1 |
| |
 |
| |
| All dimensions are in mm |
| |
| DIN /ME GROUP |
PIPE OD
D dia |
a2 |
a3 |
a1 |
T |
h2 |
 |
| 0 |
6 |
30 |
28 |
- |
3 |
33 |
| 6.4 |
| 8 |
| 9.5 |
| 10 |
| 12 |
| 1 |
6 |
34 |
40 |
20 |
3 |
39 |
 |
| 6.4 |
| 8 |
| 9.5 |
| 10 |
| 12 |
| 2 |
12.7 |
48 |
42 |
26 |
3 |
39 |
| 13.5 |
| 14 |
| 15 |
| 16 |
| 17.2 |
| 18 |
| 3 |
19 |
56 |
50 |
33 |
3 |
42 |
 |
| 20 |
| 21.3 |
| 22 |
| 25 |
| 4 |
26.9 |
65 |
59 |
40 |
3 |
48 |
| 28 |
| 30 |
| 5 |
32 |
77 |
71 |
52 |
3 |
64 |
 |
| 33.7 |
| 35 |
| 38 |
| 40 |
| 42 |
| 6 |
44.5 |
92 |
86 |
66 |
3 |
72 |
|
|
| |
| |
| |
|
| |
|
| |
Contact us :
Kurat Enterprise
67/69, Jubilee Bldg., Ground Floor,
Opposite Kalyan Bldg., Near Navjeevan Society,
P.B. Marg, Grant Road, Mumbai - 400 008. India
Tel: +9122 2300 2114 Fax: +9122 2300 2114
Email: infokurat@gmail.com
Website: www.kuratentp.com
www.instrumentationfittings.com
All Trademarks and/or Trade names are the properties of their respective owners
Disclaimer : The information contained herein is accurate to the best knowledge and belief of Kurat Enterprise, and specification quoted may change without prior notice. Information contained in this technical literature is believed to be accurate and is offered in good faith for the benefit of the customer. More...
|
|
| |
|
|
