Design and Development, Production, Marketing. Manufacturer, Exporters Quality Products such as Instrumentation Valves, Precision pipe Fittings, PTFE products, pipe fittings, flanges, valves, fasteners at cheap rates only at Kurat Enterprise from India.
|
|
|
Instrument Valves |
 |
| Instrument Valves > Manifolds Valves > 3 Valve Manifolds >> |
| |
|
| |
| Straight Type |
| |
 |
| |
| Straight Type |
| NO |
DESCRIPTION |
QTY |
MATERIAL |
| 1 |
BODY |
1 |
KE-SS 316 |
| 2 |
BONNET |
1 |
KE-SS 316 |
| 3 |
STEM |
1 |
KE-SS 316 |
| 4 |
BONNET PUSHER |
1 |
KE-SS 316 |
| 5 |
LOCK NUT |
1 |
KE-SS 316 |
| 6 |
PACKING |
1 |
|
| 7 |
WASHER |
1 |
KE-SS 316 |
| 8 |
HANDLE |
1 |
KE-SS 304 |
| 9 |
GRUB SCREW |
1 |
KE-SS |
| 10 |
DUST CAP |
1 |
PLASTIC |
| 11 |
LOCKING PIN |
1 |
KE-SS 304 |
| 12 |
BONNET SEAL |
1 |
|
|
| |
| Features |
| |
3 Valve Manifolds (Straight Type)
|
- 3 valve manifolds are designed for remote or separate mounting.Connecting from process side 1/2" NPT(F) and Instrument side 1/2" NPT(F) Connecting system impulse lines and transmitters, having simple three valves configuration which allows for easy two block or Isolate, one Equaliser valve calibration of a static pressure transmitter or gauge.
- Bleed/vent connection with s.s. plug will be provided on request.
- Approximate weight : xxx Kg (xxx Lbs.).
- Heat code traceability
|
Bonnet Assembly
|
- Screwed bonnet design.
- Bonnet-back seated blow out proof.
- Spindle - Ground and thread rolled. - Spindle tip-Non rotating tip shut off type - stellited, Regulating-stellited and soft seated.
- Bonnet pusher - silver plated for anti galling freezing for increased stem cycle life.
- Dust cap protects stem threads from externals contamination.
- Leak tight seal with low operating torque.
|
Technical Specfications
| Size : |
1/4", 1/2" |
| End connection : |
NPT,BSPT,Socket weld. |
| Working Pressure: |
6000 Psi (413 Bar) |
| Temperature Rating : |
PTFE 450 Deg. F (232 Deg.C) Grafoil 700 Deg. F (371 Deg. C) |
| Material of construction : |
SS 316, SS 304, Monel,C.S. |
| Optional Sour Gas service valves are available confirming to NACE Std. MR - 01 - 75 |
| Stem packing : |
PTFE, Grafoil. |
| Orifice : |
Dia. 4.0 |
All valves are 100% Factory tested prior to shipment.
|
|
Applications |
Refineries, liquid patroleum gas processing plant, petro-chemical plants, systems difficult to shur off due to solid contents dust,rust,dirt etc.
|
Manifolds Selection Information Data
|
Pressure &temperature ratings are selected from ANSI B 16.34 for standard class 2500
|
Testing
|
- Pneumatic Seat test is performed at 1/4 of working pressure.
- Hydrostatic shell test is performed at 1.5 times the working pressure.
- Optional test are available upon request.
|
Lubrications
|
Dye molly sulphide.
|
|
| |
|
| |
|
| |
Contact us :
Kurat Enterprise
67/69, Jubilee Bldg., Ground Floor,
Opposite Kalyan Bldg., Near Navjeevan Society,
P.B. Marg, Grant Road, Mumbai - 400 008. India
Tel: +9122 2300 2114 Fax: +9122 2300 2114
Email: infokurat@gmail.com
Website: www.kuratentp.com
www.instrumentationfittings.com
All Trademarks and/or Trade names are the properties of their respective owners
Disclaimer : The information contained herein is accurate to the best knowledge and belief of Kurat Enterprise, and specification quoted may change without prior notice. Information contained in this technical literature is believed to be accurate and is offered in good faith for the benefit of the customer. More...
|
|
| |
|
|
