Design and Development, Production, Marketing. Manufacturer, Exporters Quality Products such as Instrumentation Valves, Precision pipe Fittings, PTFE products, pipe fittings, flanges, valves, fasteners at cheap rates only at Kurat Enterprise from India.
|
|
|
PTFE Components |
 |
| PTFE Components > PTFE Components > PTFE Soft Unsintered Products >> |
| |
| PTFE Soft Unsintered Products |
|
High quality PTFE shapes and Fluoropolymer products for the industrial world.
Kurat Enterprise is in Manufacturing and Marketing of PTFE shapes and Fluoropolymer products for the industrial world.These engineered Fluoropolymers are available in Virgin and Reprocessed grades and a variety of custom compounded reinforced fillers that change the properties of PTFE for specific applications.
|
| |
| PTFE Soft Unsintered Products |
| |
 |
Universal Rope Gasket
PTFE
Rope Gasket is a specially formulated sealing
material
that withstands vibration, wide operating
temperature
range and has extremely low coefficient of friction.
The friction free characteristic promotes smoother action
and increases the life of the gasket many
times over.
It
is used as a gasket on flanged connections, pressure vessels
and all other similar mating faces as well packing for
valves and similar gland applications.
Diameter : 1.5
- 19
mm
Length : 5000 - 10000 mm
Available : SQUARE / ROUND SECTIONS. |
| |
|
 |
Thread Sealant Tape
Unsintered
pure PTFE in tape form is the standard
material for
sealing threaded joints and connections.
Joints can be taken
apart long afterward without any trouble.
It is virtually a universal
sealing material which can be used on pipes
of galvanised
Iron, Rubber, Copper, Plastic Brass, Aluminium, Stainless
Steel, Ceramic, Monel, Carbon etc.
The
inherent plasticity of PTFE allows it to extrude into
the irregularities
of the thread, so filling any voids
or passages.
It
is inert to acids, solvents oil, etc.
and will not contaminate the liquid being handled.
Roll length : 12 Mtr. or as required
Width : 12.5 - 25.0 mm
Thickness : 0.075 mm |
| |
|
It is often more efficient to use moulded semi-finished products to avoid excessive machining of relatively expensive materials and also to reduce machining labour and time.
The tooling costs are generally very low. |
| |
| |
|
|
| |
|
| |
Contact us :
Kurat Enterprise
67/69, Jubilee Bldg., Ground Floor,
Opposite Kalyan Bldg., Near Navjeevan Society,
P.B. Marg, Grant Road, Mumbai - 400 008. India
Tel: +9122 2300 2114 Fax: +9122 2300 2114
Email: infokurat@gmail.com
Website: www.kuratentp.com
www.instrumentationfittings.com
All Trademarks and/or Trade names are the properties of their respective owners
Disclaimer : The information contained herein is accurate to the best knowledge and belief of Kurat Enterprise, and specification quoted may change without prior notice. Information contained in this technical literature is believed to be accurate and is offered in good faith for the benefit of the customer. More...
|
|
| |
|
|
